Construction

Modular Case 104 is a desktop eurorack frame which offers two rows for standard-eurorack-modules and two further rows for our own VERMONA 1-U-modules. The latter are placed above the power supply respectively above the bus-board. Thus you won’t lose any space in depth for your eurorack-modules.
The middle 1-U-row is equipped with four modules: Three dual buffered Attenuator/Mixers and one dual buffered Multiple/Inverter. So with the Modular Case 104 Bundle the most essential functions of a modular system are already aboard.

dual buffered Attenuator/Mixer consists of two section for attenuating and inverting signals. There is also a mix-output for using it as 2-in–1-mixer. If no input signal is used each section can produce a voltage between –5 and +5 volts on its own.

dual buffered Multiple/Inverter is a two-channel 1-to–3 multiple inverter. Channel on also offers an offset input for moving the negativ outputs to a positive voltage-range.

Stable power supply

We have integrated a power supply with 2000 mA for each 12-V-voltage and additional 500 mA for the +5V. It will give you power for every challenging module-combination you can imagine.
It works from 90V up to 240V. As long as you have a suitable power lead you can use your modular system everywhere in the world.

The Modular Case 104 Bundle is sturdy for stages and beautiful for living rooms. Of course it is made by hand, oiled and packed with Love in our Elektroakustische Manufaktur in Erlbach.

Power-supply

• Input: 90 V – 240 V ∿, 50/60 Hz
• Output:
  • +12 V: 2000 mA
  • –12 V: 2000 mA
  • +5 V: 500 mA
• Number of bus connectors:
  • 26 on circuitboard
  • 3 on rear circuitboard

Mechanical data

• Dimensions: approx. 557 mm x 390 mm x 140 mm (W x D x H)
• Depths:
  • Upper Row: approx. 76 mm
  • Bottom Row: approx. 50 mm
• Weight: 4,5 kg
• Structure: 2 x 3 RU rows, 104 HP 2 x 1 RU rows, 104 HP