Microtech Gefell UM930SCTB

Name: Microtech Gefell UM930SCTB
SKU: MIC-UM930SCTB

$6,629.00

SKU: MIC-UM930SCTB Categories: Condenser Microphones, MICROPHONES

Brands: Microtech Gefell

Description

Microtech Gefell UM930 Microphone

Dual Condenser microphone switchable

The switchable studio condenser microphone UM 930 combines modern large diaphragm capsule technology with the latest in semiconductor circuit topology.

The optimized dual-capsule assembly opens up new applications in the recording technique.

Among conventional switching technique there is the possibility of attaching a twin-Version, viz. microphones can be used with two directional pattern at the same time.

Application

The UM 930 is specifically designed to meet the needs of professional and semi-professional users who demand the highest performance. This microphone is ideally suited for universal miking applications in broadcast and sound studios. Applications include vocalists, announcers, dialog pickup and as spot microphones for recording guitars, keyboards, percussion, wind and string instruments.

The pick-up pattern is perpendicular to the direction of the microphone axis (side addressed). The model number and pick-up pattern symbol mark the front of the microphone.

UM 930 SCT with Soundcheck Tool

Available for the UM 930 SCT condenser microphone is an 1kHz level checking test signal for checking a complete sound system following the microphone. The Soundcheck Tool is enabled when the polar pattern switching ring is placed midway between any of the polar pattern symbols for longer than 4 – 5 seconds, and the green LED illuminates. The level testing signal takes the individual sensitivity of the microphone, pattern cardioid, and it is equivalent to a sound level of 74 dB. This is 20 dB lower than the reference level at 1 Pascal, and assists in basic microphone setup during soundcheck. The Soundcheck Tool reduces the need for frequent voice tests during setup in most cases.

Mounting

Das UM 930 shown with integrated elastic suspension can be swiveled 135 degrees to both sides	UM 930 shown with EA 92 elastic suspension	UM 930 shown with MH80 microphone holder

Polar Patterns

The microphone features 5 pickup patterns: omni, wide cardioid, cardioid, hyper cardioid , figure 8.

um930_3

A muting function works when switching over the polar pattern.

When the microphone is ready for operation a green light-emitting diode (LED) inside of protection grid will indicate. Acoustic influences that could result from the housing resonance and/or mechanical vibration are reduced by the robust construction and by a special fixture within the microphone’s housing that dampens vibrations. You can replace the black o-rings at the peripheral line of the switching ring with one or more coloured rings. Available are the colours green, red and blue.

Under type designation UM 930 twin a special version is equipped with one fixed cardioid directivity pattern, and five additional user-selectable directivities. The 5-pin XLR connector enables the separate capsule directivity patterns to be used simultaneously.

This makes it possible for the recording engineer to compare the directional properties against the reference cardioid during live recording a well as in post production.

Dual Condenser Microphone		UM 930
Polar pattern		Omni, wide cardioid, cardioid, hyper cardioid, figure 8
Acoustic operating principle		Pressure gradient transducer
Dual-capsule		Large diaphragm
Frequency range		40 . . . 18000 Hz
Sensitivity at 1 kHz (cardioid)		20 mV/Pa
Output impedance		100 Ω
Noise level (cardioid)	CCIR 468 – 4	13 dB
	DIN EN 60651	7 dB – A
Signal-to-noise-ratio (re 1 Pa bei 1 kHz)	CCIR – weighted	81 dB
	A – weighted	87 dB
Max. SPL for 0,5% THD		142 dB
Dynamic range		135 dB
Current consumtion ( P 48, DIN 45596, IEC 268 – 15 )		4,5 mA
Output connector UM 930		3-pin XLR connector, goldplated contacts
Weight		930 g
Dimensions ( L x Ø )		158 mm x 65 mm
Finish		satin nickel, dark bronze